...low beam relay click when turning on the low beams and then the high beam relay click when turning on the high beams. still no low beams. Fuses for each side low beam are good (tested with ohmmeter). ...
Low Beam headlights don't work. High Beam work fine and diriving lights work as well. hi from uk provided you have checked bulbs are ok? then this fault may be the relay for the low /dipped beam has ...
come on when switch to low beams still no low beams. low beam bulb quit Low beams are on a different fuse and diff relay than the other lights. Hope this helps. What makes you think the lamps are good
Question about 1987 Camry
Low beam lamp(s) fault detected 2014 kenworth no low beam lights First check light relay fuse, if ok check battery voltage at low beam light terminal, if ok replace low beam bulb, if no voltage check ...
...low beam headlights, but high beams work. No intermittent, just stopped working. Which do you have Low Beams - High Intensity Discharge (HID) OR Low Beams - Standard ? The low beam headlamps receive ...
Question about 2008 Avalanche
...low beam operation in low light conditions. Battery positive voltage is supplied to the low beam relay and the high beam relay in the underhood fuse block. When low beam headlamps are requested, the ...
Question about 2008 Avalanche
low beam relay in under hood fuse box, use a test light, check for voltage at the lo beam fuses with lo beams turned on. I wouldn't think both right and left lo beam fuses would blow at the same time.
Question about 2008 Avalanche
...low beam . Any ideas? Do you know how to test electrical circuit's using a wiring diagram an a voltmeter ? Reading how the headlamps are suppose to work ,then testing is how to find the problem . ...
Question about 2008 Avalanche
...low beam lights. Switch is good ive ckd the fuses relay the switch was replaced new. No signal at signal wire on relay, drl works park lights work high beam works everything else seems ok Your best ...
...low beam operation in low light conditions. Battery positive voltage is supplied to the low beam relay and the high beam relay in the underhood fuse block. When low beam headlamps are requested, the ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions