loud grinding type noise and won't actually work. I'm going to look at it some more, but I would appreciate it if anyone could help me out. I originally posted my problem under the MAV6000 washer, but
loud screeching noise on spin cycle WHEN SPIN CYCLE IS STOPPED THE DRUM STOPS IMMEDIATELY RATHER THAN SPINNING DOWN SLOWLY...ALMOST LIKE THE PARKING BRAKE IS ON. VERY LOUD SCREECHING WHILE SPINNING. I
t spin but has burning smell during that cycle. Loud noise during agitating. Everything else seems fine. What's wrong? The reason to this problem can be due to the brake rotor.It need's to be replaced
Question about Centennial MVWC500V Washer
...loud screeching noises and burning smell. What could be the problem. problem could be the gearcase or the motor, to find out remove the motor and turn it with your hands to hear any abnormal sounds ...
Question about Bravos 3.8 Cu. Ft. Washer
MAYTAG BRAVOS QUIET 300 VERY LOUD WHEN IN SPIN CYCLE DID NOT MAKE NOISE UNTILL A WEEK AGO spinout bearing bad if noisey in spin only whole tub must be repaired
...loud and it spins fast no matter what level it's on. Spin solenoid could have water leaking onto it and it stuck on , but noise is most likely caused by bearing getting water into them,dose it leek ...
Question about Bravos Top Load Washer
loud on spin cycle? This machine has become deafeningly loud on its spin cycles. It is four years old - has some sort of sound proofing worn away? Is it moving around? I am guessing not so guess would
Question about Bravos Top Load Washer
LG front-loading washer during spin cycle makes loud clunking noise and burning smell During spin cycle makes loud clunking noise and burning smell BALL CHANGE DRUM WASHING MACHINE
Question about Bravos Top Load Washer
...a maytag washer and it will fill spin and drain but will not do the actual wash cycle. It's a loud noise and it smells like something is burning. Not sure what to check or even look for. bearings
Question about Bravos Top Load Washer
...noise (sounds like a loud timer & heard near the underneath side), then noise stops, drum starts for a second, then stops. Then pause, then sound and process repeats. I can spin drum easily in either ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions