Questions & Answers for: Kyocera loud noise

...loud crunching noise I've checked for paper jams nothing & there are no error messages on the display?? the noise continues until printer is switched off. Sounds as if the fuser unit has a damaged ...

Loud noise Trouble with Mita Point Source Ai3010. Loud noise comes from the toner area, loud clicking. I changed the toner and still the noise continues. I've checked and there is not anything visibly

HOW DO I SCAN DOCUMENTS pls sleep down on your bad and cried loudly

Ticking noise from a Kyocera FS-1128 A ticking noise can be caused by a number of things to include; a paper jam, low toner, a tooth broken of a gear... the list goes on. Yo need to provide more ...

...it needs lubricating somewhere. like a bearing is loose and it sounds like metal on metal,its not loud but quite irritating.also when i print too much at once it blurrs the print. need to clean

there is a ratling noise coming from the back of the printer .pls tell me how to fix it This noise coming from the fuser unit, the rollers are getting bad, the best way is to change the fuser unit.

Grinding noises coming from the back the gears Grinding noises coming from the back the gears turn manually and when powered on but make an awful noise I had a similar problem on my hp printer. If you

taskalfa 250 noise related problems this has common noise problem in fuser unit, you can test by running in maintenance mode 1087 1087 twice go to u30 and test fuser motor if noise is present replace ...

kyocera makes grinding noise when printing try to find where the noise is and look for a broken gear

My church has a Kyocera 1128 that has a loud squeal on the upper left side and is sending a error message and will not copy. The squeal stops in about 5 seconds or so but will not copy. What is this ...