Questions & Answers for: loose tap

...tapping helps? is it due to get worse? It is a loose connection, need to open the unit and the tap on the board and cables connected to check the loose connection. be careful to use a rubber

...Better get it seem to quick in case of trouble if it breaks. Tapping sound can be coming from loosely adjusted valve tappets or worn lobes of the camshaft. I HADE A SIMLER PROBLEM IT TURND OUT ...

...tube(crt) try while tv is on with the back off, tap tap tap the neck of crt with plastic side of screwdriver. hit it hard but dont break it. this will knock loose the sediments in the crt.

TAP IS LOOSE AND I AM UNABLE TO TIGHTEN The tap is approx four years old and how become loose - I can just get under the bench but not sure what to tighten - nothing seems to work. Any help would be ...

tap,even new vauxhall cars do the same.but lets be serious?to calm this and slow down the noise,get the tappeds checked out .it will need the cover removed and with engine running feeler gauges placed

...tap...and it kicks on....???...is tht the Alt...or a Wire....fuse...??? sound like loose wires.check alternator wires for looseness broken or frayed places. Loose wiring on the built-in regulator ...

...loose. Tap on nut while prying up gently on wiper arm. This is what is called a morse-taper fit, and can be difficult to break loose. Also try tapping on arm with a small hammer horizontally to break ...

...is very easy to stop it just make sure you lock the tap and loose the tap head from the pipe then you get what they call white thread for taps just rap the thread round the tap and you just fix it ...

...usually at the fuse box (Sometimes a loose or corroded main wire coming off the battery red positive side. Again tap the fuse box or the battery connections with the lights on to see if they

loose. Any suggestions? Try tapping it with a rubber mallet. Or place a board against it to tap on with a regular hammer. That way the board will soften the blows. And hit it from different sides till