Questions & Answers for: loose pulley

Question about 1998 Grand Prix

4 Answers

...pulley is loose,because shaft inside the p/s pump is bad needs replaced--falling off because of that-not fluid the pulley is loose,because shaft inside the p/s pump is bad needs replaced--falling off ...

Ad

Question about 1995 Maxima

1 Answer

...I have undone the hex head and the pulley is still stuck in place. Do I need to take the screw loose that is going through the pulley itself? yes you have to break loose the nut on the pulley ...

Ad

Question about 1999 Cherokee

1 Answer

...a loose pulley but didn't say which one! That's what I'd look at first! Also, make sure that all pulleys have no "wobble" indicating a bad pulley bearing Most common: water pump or idler

loose and wobbles? the pulley wobbles and wonders if its a loose screw or missing parts? the serpantine belt is loose and wobbles? the pulley wobbles and wonders if its a loose screw or missing parts?

...loose pulley could easily be destroying belts. But it would have to be a pulley both belts were on. A binding tensioner can also be at fault. Rust on a pulley can do it too. And the last thing I can ...

Question about 1994 Prizm

1 Answer

...Pulley" is loose when the blades are disengaged. I hope you meant that the belt is loose, because the pulley should never be loose. If it is loose, you should remove the pulley and make sure the KEY ...

Question about 425 Mx Treadmill EPTL88105 !

1 Answer

...loose. If the pulley, roller and the walkbelt stop the motor belt is loose. If the pulley continues to turn and the roller and walkbelt stop your pulley is slipping on the front roller ( press fit). ...

Question about 425 Mx Treadmill EPTL88105 !

1 Answer

...loose pulley would put the belt out of balance and that that is what would make the new belt come off. Is that right, or am I missing something? If the pulley is the culprit, is that a repair that a ...

Question about 2001 Alero

1 Answer

...pulley loose, if the bolt holes are not elongated, just tighten it back up. If the damper is loose, remove it from the engine (puller usually necessary) and inspect the crank snout and the alignment ...

...to the pulley that came loose or the vibration damper that is situated between your crank pulley broke loose and the part connected to the crank turns but the outer part of the pulley is not

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...