...line up at the 270 degree point on the crankshaft (opposite of the lines and the markings). 7. Loop the belt around the tensioner pulley, around the passenger's side cam, under the waterpump, ...
...There should be a factory blue dot on the crankshaft where the belt dots should line up. 7. Loop the belt around the tensioner pulley, around the passenger's side cam, under the waterpump, ...
...setting, use a thermometer in a middle vent. Normal vent temperature readings will vary depending on the (ambient) outside temp. The vent temperature should range from around 42-55 degrees in my ...
... I have a 91 Rodeo, to get the seat to fold down you need to lift the bottom seat by pulling on the loop that comes out of the bottom of the seat and set it so that the back faces up, then remove the ...
...means that the heated circuit in the oxygen sensor on bank 1 decreases time needed to enter closed loop. As the O2 heater reaches operating temperature, the oxygen sensor responds by switching ...
...YOU WILL LOT OF FUEL CONSUMPTION. A OPEN OR MISSING THERMOSTAT WILL CAUSE VECHICLE STAY IN OPEN LOOP.ENGINE WILL BURN RICH BURN MORE FUEL.YOUR THERMOSTAT ALLOWS COOLANT TEMPERATURE TO GET AT A
Usually answered in minutes!
832 Questions
814 Questions
819 Questions
720 Questions
623 Questions