Questions & Answers for: Brother loop setting

loop/lock on reverse of fabric stitch has locks/loops on reverse & cannot be corrected by upper tension dial . machine has done this on & off since bought last year Check the tension on the bobbin in ...

Tension problems I have a Brother XL2010 and I can't sync the upper and lower tension controls. I bent a needle and have had trouble with the tensions since. If I get the bobbin set right then I have ...

Thread looping on top and bottom of fabric I am trying to sew a baby blanket with 2 layers of flannel. The thread is looping on top and bottom of the fabric. I have tried making the tension tighter ...

loose bottom stitch on brother se 350 The bottom stitch is loose when I sew. I already cleaned the bobbin case and rethreaded the bobbin. The tension is set on 4.What do I now? Hi, general rule of ...

How do I adjust the bobbin settings on my Brother XL-3022 The top stitch is fine but the under stitch is not looping Well is your machine skipping stitches? "Not looping" does that mean not creating a

The thread is loaded into the bobbin however it keeps looping around the thing that the bobbin sits on. On bobbin holder is a small screww to set the bobbin tention, must be set (tighten) if too loose

big loops at the bottom of the material Hello smallflame, The looping on the underside of the fabric is due to the tension on the upper threading being to low. Try setting the tension dial to a higher

small loops random are appearing on the back of the fabric I am making some roman blinds - I am stitching the face and lining together with the holders for the dowels. I have done this previous with ...

...Loop and nesting on the bottom side is almost always a top thread tension too loose. Start with a tension setting of 4 sew a couple inches and then adjust accordingly. See the following how to ...

...me with this problem, all stitches have this problem. The machine is a Brother FS70WT. thank you Looping on wrong (bottom) side of fabric is almost always insufficient tension of top thread. The ...