Questions & Answers for: HP ProLiant logical drive

...Logical drive(s) disabled due to possible data loss. Select "F1" to continue with logical drive(s) disabled Select "F2" to accept data loss and re-enable logical drive(s). Hi Nick , As of now you can ...

...logical drive is still intact? If the logical drive is gone, then your partition may be lost. If you are able to recover the logical drive in your array (which you should be able to if the RAID5 ...

...Logical sequence of the drives. Also if we replace the remaining 2 with 2 new drives will it be able to recover? We have tried swapping the HDD in the remaining two slots but getting the same result, ...

...in server & connected MD1000. HP's ACU software sees and allows config of arrays & logical drives, and they are available in Server 2008, but ACU sees drives in bay 0 TWICE. Half of ...

...logical drive has a problem and in interim recovery mode. how come it can not boot? there is also an error saying the battery is unable to charge. cache battery. Please help! dear erwin, as per your ...

...logical drive.6) select Create logical drive,select both hdd's by pressing space bar.7) press F8 to confirm changes,save and exit.8) Enter into bios and set the boot controller order smart array ...

...m using array 6i. after that I could t boot from the old HDD .. how can I rollback to the normal state you  have removed existing  Logical drive and created new one which made server

...with Select "F1" to continue with logical drive(s) disabled Select "F2" to accept data loss and re-enable logical drive(s). Replace the HDD of the Amber Colour.That's ...

logical drive has been disabled due to possible data loss Our server has the "attempting to boot from hard drive....attempting to boot from cd rom....non system disk or disk error, remove and ...

...new OS Use the HP Smartstart CD and configure the with array with 2 arrays  and 2 logical drives. The first with OS array on RAID 1 (2 drives mirrored). The second array on RAID 5