Questions & Answers for: GMC Sonoma lockout code

GM THEFTLOC RADIO CODE I DISCONNECTED THE BATTERY CABLE ON MY 1998 GMC S-10 SONOMA. NOW THE RADIO WILL NOT WORK UNTIL I ENTER THE CODE, WHICH I DO NOT KNOW. I PURCHASED THIS VECHILE USED.I CALLED THE ...

flashes codes 12 and 32 intermittently after running rough What do the codes mean? Is one the egr valve? the 12 code is the start for the codes to be read code 32 is a map sensor code but does not ...

code P0410 sonoma 03 2.2 how can i fix?? I got a 03 gmc sonoma 2.2 with code # P0410 secondary air malfunction.how can I fix this These two links have the answer: http://www.obd-codes.com/p0410 http:/

...doesn't unlock the system u still have a problem and the dealer needs to rescan the system. PASSKEY LOCKOUT RESET ALL GM CARS 1999 AND UP 1) Put the key in the ignition and turn to the "ON" position. ...

I have a 1991 GMC Sonoma I took my truck to the repair shop and the mechanic put on plungs, wires, rotary, cap, and gasket and my truck still stop. The mechanic did not know what code 22 and code 34 ...

...lockout got code 1632 from computer. How do I correct this problem? this is an obd2 code trouble code table, it can help you understand the meaning of code, and this tool can help you clear the code, ...

service engine soon light is on but its driving just fine as far as i can tell this could mean that a code set it on the code not necessary related to engine performance in this case you need to check

...drive it does not make any noise and does not sound like it goes in. does the truck have manual lockout hubs on it? if they arent locked in the 4wd wont work..usually the truck needs to roll some ...

P0420 code on 1999 GMC Sonoma 2.2L enngine I get a code of P0420 on my 199 Sonoma. I got a new catalytic converter and O2 sensor installed, but the check engine light still appears. What more can it ...

Check Engine soon light light will not clear code 32 code 32 is egr problems pintle stuck or vacuum pack, vacuum hose. to clear code unplug battery for 15 sec and then reconnect it start engine and ...