Questions & Answers for: Honeywell lockout code

Honeywell TB8220U1003 Thermostat--How do I manage KB lockout Honeywell TB8220U1003 Thermostat--How do I manage the keyboard lockout feature? Hi, The easiest way to find out that is to go here and look

Lockout light flashing for 1/2 sec. I have a Weil-Mclain oil furnace. There is less than 45 gallons of oil (which I am sure is the prob)left in my 550 gallon tank. It just shut off this AM as I was ...

...code 6 "Pressure switch lockout". without coming back on until turned off at the switch and rebooted. Check your drain line. It appears that water is not draining and backing up into the furnace. Is ...

...code, exceeds tries or recycles aka system lockout. If I reset the furnace it will work fine for a couple of hours and then the fan keeps blowing with no heat. And shows the error code again. I have ...

...lockout So out xv95 furnace is giving us the 2 red 2 green error code which says it has exceeded the retries or recycles, aka system lockout. I went outside to make sure the vents were clear. If I ...

lighting instructions for oil furnace Tanks were empty, got oil delivered, the furnace wont burn and the lockout won't reset. Prime?? Air in line. Prime and shut off power to unit at least 1 minute

how do i reset the lockoutwhen the red button won't reset? after priming, the red button does not reset the lockout Try shutting down power at breaker for atleast 1 minute

how can i reset the lockout oil supply is primed, the red button is not resetting the lockout Hold button for about a Minute.

how do i reset the lockout the oil is primed. how can i reset the lockout? the red button won't reset the lockout. green light still blinking 1/2 second flashes. Push and hold the button for 60 ...

Honeywell r7184b flashes 1/2 second and doesn't respond to reset procedures. Probably on hard lockout. Need service tech.