Cover lock The locking motor for the cover is not working correctly. If in the locked position (by hand) the motor unlocks correctly. This suggests the motor, wiring and any relevant fuse are ok. When
...cover to secure it but, It is not working or, I am not doing what is neccessary to lock it. What do need to do? Thanks, Lou from Palm Desert The normal operation is for the door to lock a several ...
...and tighten 18 ft. lbs. (24 Nm). Make sure to use some plug grease on the threads to keep them from locking up. You will probably need an extention if they are deep. You may need a magnet pen to get ...
ignition is locked The ignition will turn to aux, but thon stops Check under the dash at the top of the Brake pedal lever. There may be a switch there if they imitated the Ford system while Ford
xc90 driver seatbelt stuck in pillar seatbelt been constantly locking each time i put belt on, so had to keep slacking off then pull gently, now belt won't release at all and is completly stuck in ...
...lock, around the lid or lip of the boot where the lid fits to the boot opening normally under a rubber cover. You may be able to fool the car into thinking it is shut by bypassing the switch. ...
Usually answered in minutes!
487 Questions
211 Questions
117 Questions
116 Questions
61 Questions