Questions & Answers for: Pontiac Grand Am lock cover

lock if needed. Lift and remove the cover to expose the plugs and the short/stubby plug wires. Yes those boots are plug wires. Now remove the boots if they didn't stay on the cover when you removed it

...cover. Turn lock cylinder to run position. Push against locking button on back side of bearing and housing assembly and remove lock cylinder. INSTALL Lock cylinder to housing assembly. CAUTION : ...

Install a Ignition lock cylinder 1997 Pontiac Grand Am Ignition Removal Instructions Disconnect the negative battery cable from the battery. Refer to Battery Negative Cable Disconnection and ...

MY ENGINE HAS LOCKED UP.HOW DO I FIX THAT WITHOUT HAVING TO REPLACE THE ENGINE how is it locked up? did you pull the skarkplugs and try it?? remove the valve cover and see if all the stays are in ...

...cover slots Fuel pump and baffle assembly onto the reservoir retainer by rotating it clockwise until seated Lower retainer assembly partially into the reservoir by aligning all 3 sleeve tabs and ...

...and it will come out Hi!! Here are the steps to follow in order to remove and replace the ignition lock. Also I'm including a diagram of the Ignition Lock for easier component identification. ...

...cover to access the ignition switch assembly. If the covers and interior parts of the steering column are dirty or dusty, try cleaning them with a damp, lint-free cloth. Depress the silver button on ...

...blown which one is it?? The fuse panel cover should have a diagram on it with locations of the fuses. the cig lighter is usually called ACC. I'm not sure what the power lock would be called, maybe

My trunk keeps popping open? What does the switch look like to disable the lock so that i can use just a key to open it it well be next to lock pull down cover well see it unplug

2002 2.2L engin 4 cylinder Pontiac grand am steering wheel don't lock after driving car. in park position and remove the keys. Steering wheel moves freely?? It's it the ignition switch going bad?? The