Questions & Answers for: Harley Davidson lock cover

Question about 2003 FLHR Road king

1 Answer

...lock cover. I have prized off the ring around the lock hoping to find 2 bolts or screws, but they appear to be some kind of rivets!!!! Please help. Take off the screws under the stearing lock cover ...

Ad

Question about 2001 FLSTF - FLSTFI Fat Boy

1 Answer

...adjuster outwards making the cable longer until you have about 1/8 inch (3mm) free play between the lever and the lever stanchion. Lock the lock nut and reposition the bellows cover. Good Luck ...

Ad

Question about 2004 FLSTC - FLSTCI Heritage Softail Classic

1 Answer

...Lock the locknut down and replace the derby cover. Now, go back to the cable adjuster and turn it outwards until you have about 1/8" freeplay in the hand lever. Lock the locknut down and replace the ...

Question about 2004 FLSTC - FLSTCI Heritage Softail Classic

1 Answer

...derby cover. Go back to the cable adjuster and adjust the adjuster outwards until you have about 1/8" freeplay at the clutch lever. Tighthen the lock nut and replace the bellows cover. Good Luck ...

Question about 2004 FLSTC - FLSTCI Heritage Softail Classic

1 Answer

...cover out of the way, break the lock nut loose, and adjust the cable to have as much slack as possible. Stand the bike up straight and remove the derby cover from the primary cover. In the middle of ...

Question about 2004 XL 1200 C Sportster Custom

1 Answer

...1/2 turn. Install the locknut and spring and cover. Go back and adjust the cable adjuster outwards until you have about an 1/8" freeplay. Lock the lock nut and replace the cover. Good Luck ...

Question about 2006 FXDLI Dyna Low Rider

1 Answer

lock nut and replace the cover. This should do the trick. If not, repost and let me know and I'll tell you how to check the throwout bearing. This will require pulling the clutch release cover off

Question about 2006 FXDLI Dyna Low Rider

1 Answer

...lock nut down. Replace the derby cover. Now, go back to the cable adjuster and turn the adjust barrel out until you have about 1/8 inch of free play at the pivot point of the lever. Squeeze the lever ...

Question about 2008 FXD Dyna Super Glide

1 Answer

...lock nut down. Replace the derby cover. Then go back to the cable adjuster and turn the adjuster barrel outwards until you have about an eight inch of free travel in the clutch cable. Squeeze the ...

Question about 2008 FLHX Street Glide

2 Answers

cover off loosin lock nut in center if pack tighten addj screw turn in till seats back out 1/2 to 1 turn tighten lock nut . take slack out of cable . hatleytalking.con ...good luck Loosen clutch cable

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...