Questions & Answers for: locate crank shaft sensor 2000

Question about 2002 Maxima

1 Answer

...crank shaft sensor but my mechanic just replaced it with a genuine nissan part and cleared the code and still comes up that it is the crank shaft sensor and the TCS and SLIP lights come on fairly ...

Ad

Question about 2000 Maxima

1 Answer

...crank shaft sensore is cousing that problem with week spark? yes. the camshaft / crankshaft sensors are known to go bad and will give you the problem that you are having. does the car have a check ...

Ad

...crank shaft sensor located on 2004 nissan maxima 3,5sl As an owner of an 04 Maxima, I noticed my car went into "S" gear. The car turned on and sounded fine but had zero power. When I scanned my car ...

...2000 GXE... Speed sensor location on a Nissan Maxima 2000 gxe There are two speed sensors one is called a revolution sensor that is located on the case of the transmission. You can take the driver ...

Question about 2002 Maxima

1 Answer

...shaft sensors on a 2002 Nissan max. Is is complicated to go under the hood and replace them? It is not difficult. It is located on the timing cover on the passenger side of the engine. You'll see a ...

...is bank 2 located for the camshaft position sensor on a 2004 nissan maxima bank two is the bank of cylinders that is closer to the radiator...not the firewall side. Then where is the crank shaft ...

where is crank sensor located on nissan maxima 3.0 crank sensor is at the bottom of the crank pulley. right under neith the pulley is a 2 wire sensor bolted to the engine with 2 bolts.

Question about 1992 Maxima

2 Answers

...crank angle sensor, which caused the engine to stop while driving. See here for a list of other known troubles in that model. You could usefully check them all ...

what is the location of speed sensor a on 2000 nissan maxima where is the speed sensor a located on a 2000 nissan maxima It uses the ABS wheel speed sensors through the ABS control module I do believe

and run before you worked on it? Double check your work. Make sure you didn't knock any electrical connectors loose. If your crank sensor is down by the crank shaft pulley, make sure it wasn't damaged

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...