Questions & Answers for: line in use when phone is on hook

...phone line. If you have the fax line connected to one of your station ports, you may be able to see which LED lights up on your phone when the fax goes off hook. Or you can just try intercomming all ...

...to parrellel phone dectection. ATT 1717 already think, the system is busy or in use. The line voltage is too low when you hook up other phone. Your house phone line maybe far from switch (3km to

...phone line connect to the tower and the modem for the broadband. What do I do? Thankyou Brenda Hi Brenda, Your All In One wants a phone line hooked directly to it. It won't fax without a "POTS" line ...

...phone line in I cant get on the internet, even tried another filter from the splitter and it still knocks me off the internet The phone line should plug directly into the Line plug on the DSL modem ...

...phone/dsl line (basically have only 1 wall jack, like me) to make sure you use a phone cord that only has 2 gold connectors (look in the head on either end). Most regular phone cords have 4. If you ...

...phone line have one phone line and want to hook up fax, but line will be used mostly for calls. device that will be able to tell if the call is meant for the phone or meant for the fax machine. "The ...

...even though there is no call on the line. Something is off hook with that line. You can try to reboot the phone system....but you will need to find the extension responsible for going off

...lines? on Brother MFC-5890cn I don't have a manual on where the fax lphone line goes The phone line goes to the plug marked L or line, the one with the picture of a phone is for an answer

...phone line in the building and the phone line interface equipment at the telephone exchange has timed out the connection. Find the phone off the hook and hang it up. I used to work for a ...

...phone says line in use Line in use means the line is seized or off hook, this can also be caused by a short on the phone line. Disconnect all other phone/devices and if problem goes away, reconnect ...