Questions & Answers for: Ford Crown Victoria lighting

dash lights and tail light not working My dash lights and tail lights are not working. I've checked all the fuses including #9 and they are all good. Not sure where to start looking. Maybe a relay??? ...

...is it may have seperate circuit (fuse), check all your fuses ANOTHER THING TO CHECK IS THE LCM (LIGHTING CONTROL MODULE) UNDER THE DASH OVER THE GAS PEDAL IT HAS 2 PLUGS & 2 7MM SCREWS IT IS ...

brake lights in tail lights not working. I have replaced bulbs, dash lighting switch, lighting switch on steering colum. I have checked the switch on the brake pedal with 12 volts on each of the two ...

head lights stay on even in off position with the keys turned on w/ engine no tail lights except when i hit the brakes no signal/hazard lights no interior lights or license plate light.... does anyone

No turn signals, 1 driver brake light bad, ABS light on. 2002/2003 CVPI My late model 2002 CVPI is having some serious issues. First off when the head lights are on and I step on the brakes the driver

my tail lights don't work but my brake lights do when drivng with lights on, my tail lights wont work, but when brakes are applied they work. also the dash light doesn't work. any ideas ? ...

no head light turn lights brake lights dash lights inside light i have a 2003 Crown Victoria Police Interceptor 4.6L v8 I have no head lights turn lights brake lights dash light I changed all the ...

I thought someone might have moved gas tank so I removed skid plate There could be a defect in the lighting control module, the multifunction switch, or both

2003 ford crown victoria with working brake lights but no parking or rear lights tail lights don't work but break lights do. marker/parking lights don't work but turn signals do work, front and back. ...

REAR LIGHTS AND FLASHERS IS NOT WORKING TAIL LIGHTS SIGNAL LIGHTS BOTH SIDE AND INTERIOR LIGHTS ITS NOT TURN ON Hi there your problem is either Light switch, broken wire from switch or from the fuse ...