Questions & Answers for: Chevrolet Blazer light switch

Question about 1997 Blazer

2 Answers

...this problem. is the light switch in the back of the blazer on, that will turn on all the dome lights and not shut them off until that switch is turned off, it's just inside the blazer on the

Ad

Question about 2000 Blazer

1 Answer

...switch only service engine light will burn, no other lights will burn, no Tach, no Speed O. no fuel guage, no door locks, no dome lights. Truck starts and run fine. you can turn on headlight switch ...

Ad

...light switch in the auto position. I have discovered that there is no wire going to the passenger front door switch. Should there be, or is this a factory design for the vehicle? on your interior ...

...light switch or right hand front door switch) is remaining closed when all doors are closed. Next disconnect the black lead from the dome light switch and see if reading changes to zero. If it does ...

light switch is located, easy to accidentally moved it all the way to turn on your interior lights on. Thank you for using Fixya and good luck. Keep me posted, if it's not your dimmer switch. The it's

...the multi-function switch in the steering column. The 3rd brake light is powered directly off the brake switch while the regular brake lights are wired thru the turn signal switch. Common ...

Question about 2002 Blazer

1 Answer

light switch. If you have that you should have 12 volts exiting the switch when the brake pedal is depressed. If you have that and the center brake light works you have a problem with the turn signal.

Question about 1984 Blazer

2 Answers

...LIGHT UP? TESTED OLD AND NEW SWITCH . If you make the jump with a wire at the switch and the brake lights work your new and old switch are not adjusted right on the brake peddle arm. make sure when ...

light switch separately (by hand) while someone watches the lights. Adriana, the male connector that goes into the brake switch that you replaced. Please check the wires going into this male connector

...light switch and see if they start working again. If they start working, replace your hazzard light switch. If it's not that, it's your multifunction switch. Your lower brake lights run through the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...