Questions & Answers for: light fixture out

...light fixture but how do I disconnect the wires? Pretty simple just remove the light fixture then you just have to remove the bulbs from the fixture and wire assembly remains intact then just fit the ...

...light fixture and Lutron switch no longer Short in light fixture- changed the fixture and Lutron switch no longer works. A regular on/off switch does work with the new light fixture. The short blew ...

...light fixture going to two other lights then to a switch. Can multiple lights be done with just 2 wire or will it require 3 wire? Here you go: You are installing a two switch controlled lighting ...

light fixture apart to fix the balace? You may find that a new fixture is the easier and cheaper way to go as some ballast can be expensive and hard to find the matching style. A similar style fixture

...light, turn off switch and at fixture #5 reconnect the colored wires except the wire going to fixture #5. -Turn on the switch. -If it trips the problem is at fixture #6. -If lights 1,2,3,4,6 light, ...

...dimmer switch on the fixture Check for 120Vac cming into the light fixture, if its there, the problem is your fixture, the fixture switch, or the way you wired it into the circuit.at the light ...

...light cover onto the fixture. are there any clips on the fixture that hold the cover, if not, the cover probably wraps on to the fixture. It is very easy .You just need to pull to one side until the ...

...fixture that emits the light that you need. A decent LED fixture will last 50,000+ hours, will handle unlimited on/off cycles. If it is residential, shop at your local stores. For better commercial, ...

...fixture have 115 volt power bulb doesn't light up Does the bulb work in a different fixture? Sometimes the base of the bulb does not make contact with the terminal inside the fixture. unplug the ...

...fixture (light switch, circuit breaker, ect). Check that you are actually getting power at the fixture (voltage tester, test light, multimeter) Check your wire nut connections (make sure each wire is ...