Questions & Answers for: Mazda B-Series light bulbs

...light to see it power is getting to the lights... if so examine the sockets and look for green spots. if found clean them till they are shiny... also look to see how the sockets are grounded to the ...

...(Ford Ranger) truck I am having problems with the towing wire connection.LH turn signal and brake light on trailer connection LH side will not function. I checked the wire harness and all is ok. It ...

left side would not work but right tail ligt did. all other rear lights work. had someone look at it and now neither tail ligths work and am blowing 10 amp fuse whenever lights are turned on. i have ...

where do i find the flasher for the indicator? the left light wont come on even thogh we bought a new bulb most of the time u will find the flasher in the fuse panel or around it you can look under ...

i have a 1994 mazda pickup b400 no tail light? CHECK TO SEE IF YOU HAVE POWER TO THE LIGHTS FIRST IF YOU DO,REPLACE BULBS/AND OR SOCKETS.IF NOT CHECK FUSES,RELAY,AND SWITCH. TIM

...pedal is depressed, not enough to light the bulbs but enogh to drain the battery.i hope this helps, let me know if you need further help and please dont forget to rate my  solution. good

light bulbs could be at fault....They are designed to work with the brake pedal and the night running lights....The bulbs work as a two way light....This means they have 2 small wires inside the bulb.

tail lights go out when i press the brake pedal when i apply my brake pedal both tail lights will turn off and not come back on.They will come back on randomly but as soon as i press brake pedal off ...