Questions & Answers for: light balast

...light comes on and blinks. No lamp and fan by filter comes on. The fan by the lamp does come on. Changed lamp, checked all fuses and transformer and all seem OK. Where is the balast located and how ...

check engine light I have dlp 5063w when I plug it in light blinks in front of tv no I replaced light balast and power board still the same can you help

...balast unit in your light fixture. Check under the cover plate in the middle of the fixture and look for a rectangular (usually black) box. If it has any brown liquid leaking from it then it ...

light (according to the manual, that is a "lamp voltage too high" error). Do I need a replacement bulb, or have I accidentally messed up the settings of my projector? You need to replace the balast as

light flashes 3 times and on the other lamp flashes once. thanks brian This is because you have a bad lamp balast you need to change the balast as that is proving incorrect current to the lamp due toa

...light flashes 3 times continously. Makre sure the Door is closed on the lamp housing, You cannot just turn this on with the Door open. ( times out of 10 that is what is causing the issue. If the door ...

Light bulb burnt out with loud popping noise and there is a smell like a burnt balast. Replaced bulb and now both lights stay on all the time, fan is very low and there is a smell like a balast burnt.

...balast taken out of the Toshiba TV # 62HM15A. Reason being, there was no picture -- just black screen, after power on, green light appears then green light blinks then it makes cliclk and clack noise ...

light ballast have 0V AC. Seems obvious to me there is some kind of wiring mistake internally. Thoughts? sounds like there is a lose or broken conection from were the feed to the balast slits from the

panel is on no picture cant shut off blue light with remote was on made bussing noise piture came in andout went blank and blue display light stayed on Sounds Like A Defective Lamp Or Balast Assembly.