...handle to lift the door. The right side releases as normal, left side will not. I do not see any way to remove inside panelling short of ripping it off with the lift door still closed. Is there a ...
...should also be a rod going to the handle that is held on with a clip. One end of the clip just lifts up off of the rod and then the rod should slide out of the handle.Sometimes it is a little ...
...handle on my 1999 Chev. Astro van...I closed the door and now it won't open..even the inside latch won't open the door take the door card/trim off and put your hand inside and pull the cable or lift ...
...and the plastic clip that holds the rod into the handle neeeds to be rooled back so the rod can be lifted out then with the nuts removed the handle can be wiggled
...handle, lift up on the ebrake pedal while you have handle pulled back. not come on? open hood look for square black box marked main fuses and or relays. lift cover up on box, turn the lid over and ...
...handle on the lift gate and remove it. Mine had two cover pieces over two 10mm bolts. Under the handle and handle plate you can access the push rod for the left side latch. Mine snapped back into ...
handle was broken and now removed and I have access to the rods but they will not move the latch to the open position. Inside panel is against the seat so it will not lift off. I am about ready to get
...handle. Remove the screws under the armrest. Remove the door lock button. Remove the switch for window operation by levering it gently out of its recess. Take a flat bladed tool (such as a ...
Usually answered in minutes!
481 Questions
367 Questions
305 Questions
235 Questions
244 Questions