...at all. I found this solution on the web-- Hope it helps. The HL-2070N gets stuck in a toner end-of-life error condition. Perform the following to clear : With paper loaded, new toner in, Open front ...
...time and needs to be replaced or is faulty. There is a way of resseting this life. Get in touch and clarify if its an actual physical problem with the laser or just that its life has ran out. Hit the ...
...time in the ready status. The "Reset Parts Life" will appear on the LCD. Select the applicable periodical replacement part by pressing the 'Up' or 'Down' button and press the 'OK' button. Hello, The ...
...Info > Reset Parts Life (if it only shows "Parts Life", then do this: Press GO and UP arrow at SAME TIME > Reset parts life Scroll up or down to choose which part to reset Press OK and ...
a user has to keep pressing the button to keep it printing and screen states DRUM LIFE ENDS SOON. . She just had a new Drum installed Just do this to reset the drum life counter since you just install
...press the Go and + buttons at the same time until the menu "RESET PARTS LIFE" appears on the LCD display. Select the required item (part name) using the "+/- " switches, then press the "Set" ...
...time, the reset parts life comes up, use up arrow or down arrow to scroll thru to drum replacement, press the ok button when you get to drum, the machine will have drum unit ok?, press okay, machine ...
...to reset. If it only says "Parts Life", which only reports, and doesn't do anything, then do this: Press GO and UP arrow at SAME TIME > Reset parts life, Scroll up or down to reset the
Question about HL-4070CDW Printer
...time soon. The life on the kits is based on a certain number of pages being fed through it. The rollers wear with every page sent through. These rollers when the kit expires means they are probably ...
can laser unit life be extended? NO Lasers have a life, but they can die at any time,
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
377 Questions
249 Questions