Questions & Answers for: lid lock washer leaking

Ad

Question about AW22 Top Load Washer

1 Answer

...lock the lid ( and turn on the pump).THe switch is activated by a piece of plastic ( often in the form of a loop) attached to the lid which pokes through a slot in the metal top of the washer. a ...

Ad

Question about AW22 Top Load Washer

1 Answer

Washer Problems No fill: Bad water valve kinked hoses unpaid water bill faulty electronics. Overfill: trash in water level switch tube bad water valve bad water level switch faulty electronics. Washes

Ad

Question about Ultimate Care II LSQ9564J Top Load Washer

1 Answer

...the tub is not locked in place. What do I do? Thanks in advance. by removing the top cover of the lid there is no chance of water leaking from the tub ,check for any holes inside or outside the ...

Question about 98702 Stacked Washer/Dryer

1 Answer

lid switch and some part of it may be faulty. If you are handy you could test the switch for power and continuity by taking the top of the washer off (unplug the machine). If at all unsure call a Tech

...and off when driving how do i fix it could be the rear washer leaking inside the boot lid and causing the lock connection to get damp remove the boot lid cover just two screws and pull cover

Question about 24032\24036 Top Load Washer

1 Answer

...washer to wash but no spin with the lid open. Newer models won't allow for wash or spin. After you remove the case you will notice the lid switch quick connect has 3 wires. 2 hot wires and a green ...

Question about WA37T26G Top Load Washer

1 Answer

...lid lock. After initial fill, all wash lights go out, advances to rinse, then beeps continuously. Have to shut machine off and start over. Continues to wash, but leaks out of top panel under lid. ...

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

...lid lock switch start cycle then stops even though lid lock on then starts beeping Check to see if there is water on the floor , I had similar problem I traced it to my tub leaking onto the shifter ...

...leaking from the filter lid. The O-ring is in place, but it seems like I cannot get the lid tight enough to stop leaking. Any ideas? It pump seems to be working properly but it sprays water from the ...

Question about 2500 GPH Filter Pump Krystal Clear Model 633

1 Answer

...lid lock light suppose the be on for the washer to work The washer does lock the door before it will do the washing. But the problem is probably not just the light burned out. Some system problem is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...