...LG WM0642 FL washer Have had an LGWM0642HW FL washer for 2 years and got the LE error code for first time tonight. I did the drum hand rotation before the load I got the error in when I was looking ...
...LG washer. Le error code. On LG Washers the code LE is for motor overload protection. Ensure that you are not overloading washer, make sure to clean pump by draining at little door at lower left ...
...WASHER LG FRONT LOAD WASHER Model WM2077CW. ERROR CODE LE. CALLED CSERVICE AND TRIED TO RESET BY UNPLUGGING WASHER AND THEN PLAYING WITH THE SETTINGS. DIDN'T WORK. WILL FILL WITH WATER AND SLOSH IT ...
I have an LG Front Loader Washer, Model WM2016C, it is reading error code LE. Hi, Here is a tip that explains what the LE error code means..... LG Washing Machine LE Error Code or Fault Code ...
LG Tromm washer I get the error code LE. The washer starts and tries to spin but acts like it is caught. I have tried it empty and it does the same thing. It also makes a funny noise which I can only ...
LG washing machine loud and error code LE Hi, Here is a tip that explains what the LE error code means..... LG Washing Machine LE Error Code or Fault Code heatman101 Please replace Motor sensor
LG WM2032HW front load washer shows error code LE. I looked at the manual and it says 'Overload in motor'. Is that a big problem or can it easily be fixed? Hi, Here is a tip that explains what
Question about WM2233H Front Load Stacked Washer / Dryer
...washer has been plugged back in. On LG washers built *before* 2008-after several "LE" error events-the error *cannot* be reset by unplugging the washer. This indicates that the HALL EFFECT SENSOR has ...
Question about WM2277H Stainless Steel Front Load Washer
...LE code fix https://www.youtube.com/watch?v=jrBKF1QzE0M LG Washer LE Error Code Easy Fix Part 1 Have you checked the LID position. Sometimes the lid lock fails and keeps other functions from
Question about WM2277H Stainless Steel Front Load Washer
...LG Washer Error = Drive Motor Locked Error CHECK / REPAIR / FIX = Check the wire harness connections on the motor and the hall sensor (tachometer). Repair any wiring issues. If the wiring connections ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions