Questions & Answers for: lg washer doing final spin

LG washer uses so little water, clothes aren't even damp and not clean Hi, I know the LG washer is supposed to use little water, but mine uses so little water the clothes aren't even damp. They come ...

...final spin cycle. Tub pulley can be turned by hand and clutch appears to engage belt. What do I do now? Hi, you should check your wash and spin solenoid, located on gearbox assembly, or check for any ...

...loads, if you cannot even get the washer to go through a cycle on the lowest spin speed, you may have to wring a bunch of the water out of the clothes by hand before doing the 14 minute cycle

washer does everything right but when it comes to the spin cycle it says OE on the screen this should help ya check this out http://www.whitegoodshelp.co.uk/wordpress/lg-washing-machine-error-code-oe

...washer or at the front door gasket 6) Damaged Hall Effect Sensor (on 2007 or older LG washers) 7) Reduced Spin Speeds (laundry not spin-dried effectively) Most consumers were doing what is *normally* ...

...gear in the washer,you'll know if it breaks you'll hear the tub banging all around loudly when it's in final spin,the spider gear is made out of soft metal and the extra detergent eats at the ...

washer shows a UE error during the final spin. It does not reach the fast spin speeds, but shows the error after 5 minutes. hello ue is an unbalanced error one of the first things you can do according

...washer is this? For LG washers, an LE code can be minor or a major issue. Do you see suds in the machine? Then this could be the result of too much detergent in the washer. Unplug the washer and wait ...

lg washer rotates but wont spin the drum rotates during the wash but won't do the final spin. any ideas anyone There are a couple of magnetic sensors that can go bad and cause this to happen. This ...

...LG washer we get a loud humming doing from the drum. If under your washing machine there is a trace from the water (rust, water stains) or just a loud noise then you need to replace the drum