Questions & Answers for: lg tromm dryer

LG Tromm Electric Dryer Hey just a quick question, the coating on the drum of my LG Tromm Dryer is comming off, is that normal wear and tear after 6 or 7 months in use? I've never seen a dryer drum do

lg tromm front load dryer dlg5988w My LG Tromm front load dryer is not using hot air. On the sensor paid its say cooling no matter which buttons i press dryer has two fuses check both circuit breakers

...LG TROMM the check filter light is flashing and drum won't turn more than a quarter turn. I unplugged it and turned it back on nothing happened I turned off the breaker waited flipped it backed on my ...

LG TROMM Front Load Dryer / Not drying clothes I have an LG Tromm front load dryer that is approximately 18 months old. It takes almost 3 hours to dry a load of clothes. The dryer is hooked-up ...

...LG TROMM DLG5988S, it doesn't warm up my clothes I have a LG TROMM DLG5988S, it works pretty well, but it doesn't warm up my clothes your element is defective or a thermal fuse is open, possibly the ...

...LG TROMM DLG7188WM dryer has no heat Our LG TROMM DLG7188WM was drying poorly and now doesn't heat at all. We have checked the filter area, the vent hose and all are clear. What else could it be? ...

can my LG natural Gas dryer be fitted with a can my LG Tromm DL7188WM (Natural Gas) dryer be fitted with something in order to convert it to LP Gas? orfices, gas valve and regulator

...lg tromm DLG69885 gas dryer is not heating; oth... My lg tromm DLG69885 gas dryer is not heating; otherwise it works fine. Dry light flashes cooling light stays on solid Hi, I am using LG Tromm ...

...LG tromm dryer wont heat and i don't know how ignite the pilot my LG Tromm dryer wont heat and i don't know how to ignite the pilot Hi, If you are having problems with your gas dryer not heating the ...

...lg tromm dryer lg tromm dle3777w eletric dryer, dryer turnson, lights up but once i hit the start button frumm turns half a turn then stops, power is still on is this a belt or motor or sensor issue? ...