...2) The tray may be in-between two settings. Try to readjust the tray length setting between sizes. (You will notice the plastic tabs will change order.) The last time you loaded paper it may have ...
Question about Optra T614 Laser Printer
Lexmark Optra T614 no longer recognizes the duplexer. Prints single sided only from Paper Tray 1. Does not recognize installed Duplexer or Paper Tray 2. try reseating printer on top of duplexer/tray. ...
...tray 2 or duplex On T642 lexmark the unit does not recognize tray 2 or the duplex unit installed. Setup only shows tray 1 and mp as tray options. It is not the tray 2 or the duplex unit because ...
tray 2 when tray 1 is empty The printer won't recognise tray 2: when tray 1 is empty it just waits for paper - it doesn't go to tray 2 (which DOES have paper) ! Have you tried checking that tray 2 has
...Lexmark T640 does not seem to recognize paper "tray 2". I want to print legal, but it only prints from tray 1. How can I get the printer to recognize and use tray 2 so I can print legal AND letter? 2 ...
tray. for letter size paper 2 fingers should be sticking out. if the fingers are present and not broken off. look into the opening that the tray was removed c from on the left side half way back there
...Lexmark T634N printer. I have problem with it recognizing the 2nd tray and the Duplexer. I have replace the motherboard, replace the connector on the printer, updated the software on the printer and ...
Question about E250dn Laser Printer
...drawer for a Lexmark E250dn Make sure to enable that under printer properties. Just go to Printers and Faxes > Right Click on the Lexmark icon > Properties > Configuration > Check Tray
Question about T630 Laser Printer
tray 2 but will not print from tray 2. When printing we would go into the program to print from tray to and to test if the printer is using tray 2 tray 1 is removed. when the printer starts to process
Question about T630 Laser Printer
tray 2 but it will not print to tray 2. When printing we select tray 2 in the program and pull out tray 1 to test if it still pulls from tray one and when the printer gets the job it give the alert to
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions