Question about 42 in. Precision Cut Plus 24hp Lawn Tractor
...lawn mower is not cutting evenly My craftsman lawn mower is not cutting evenly side to side. I did all the adjustments that were described in the owners manual and it still is uneven. Could it be a ...
Question about 20 hp 42 in. Deck Lawn Tractor - CA Model
...lawn uneven, one side shorter than other I just put new blades on the riding mower, Craftsman 42" Briggs & Stratten. Still I get one side cutting shorter than the other. Is there an adjustment ...
Question about 20 hp 42 in. Deck Lawn Tractor - CA Model
...lawn is cut uneven-yes, blades are installed correctly-grass side down on ech blade. I put a new mulching blade set on mower -was not a mulching blade before. is this an issue? Checked shaft blade is ...
...mower cuts uneven with the center blade only. What can casue this issue. Henry Bent or dull blade. Have it checked, or replace it. Thanks for using FixYa - a 4 THUMBS rating is appreciated for ...
Question about Lawn Mower With Toro Power Tools
...lawn mower was cutting uneven. It was not the deck, the blades, the wheels, or the deck height adjustment. It was cutting uneven because in order for a mower to blow air out, it has to draw air in. ...
Question about Rzt 50" Zero Turn Riding Lawn Mower
...mower deck and flip it over on the ground. Grass and mud buildup in the decj could cause a blade to pinch grass, 'scalping' the lawn. Clean it all out. Dull blades cause cut grass to look torn and ...
Question about 42 in. Deck 19.5hp Lawn Tractor
...mower cuts uneven, what is the problem? Several things here could be the problem. Check to see if mower deck is level, measure distance on both side on a level surface. Check tire's for low air. If ...
...mower and it cuts uneven. mower is deck is out of alignment. less than 1 hour on it. The deck could be bent, or you will probably have to level the back of the deck as well. Another thing to check is ...
...lawn tractor is cutting unevenly I would suggest checking your owner's manual. There is a leveling process and my Craftsman wasn't leveled at the factory. Once I leveled mine, it cut fine. If ...
cuts lawn uneven Need to adjust mower deck side to side and front to back.
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions