...cleaner was sprayed into carb intake, but would not stay running. discovered the blade was loose. motor needs the extra weight to run properly. as soon as the blade was on tight mower ran like a ...
Question about Lawn Mower With Toro Power Tools
...lawn. shut off mower, moved to another section to mow, and the bolt holding the blade came loose. tightened the bolt down to 60lbs and it still comes loose. so i bought a new blade (after trying to ...
Question about 675 Torque 190cc 21" Briggs Stratton RearBag Push Lawn Mower (CA) ()
...blade comes loose the engine doesn't have the momentum to keep turning inorder to start. If the blade is tight , then I would check the timing. This would involve the shear key. It is located ...
Question about 675 Torque 190cc 21" Briggs Stratton RearBag Push Lawn Mower (CA) ()
blade won't stay tight blade won't stay tight if the blade keeps coming loose replace the hub that holds the blade in place
Question about 675 Torque 190cc 21" Briggs Stratton RearBag Push Lawn Mower (CA) ()
my blade holder on my tornado lawn mower keeps coming loose Sounds like you need to take the blades off and replace lock washers under the bolt heads and reinstall
Question about 22" Yard Machine Push Mower
...lawn mower and now bolt and blade keep coming loose. I added a lock washer to bolt but it did not help. Do you have any ideas? is the bolt stripped so it wont tighten? Is the threaded hole on the ...
lawn mower and now bolt and blade keep coming loose, I added a lock washer to bolt but to no avail. Can you help? loose the lock washer before you cut your own feet off or kill the neighbor with blade
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
mower bolt and nut that tightens blades keep coming loose Blades keep coming loose Get some red lock tight and put it on the spindle shaft threads. Sounds like the threads are worn down and just won't
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...lawn mower? usually counter clockwise . lefty is loosey , righty is tightey The rule is to remove nut , Turn the nut the same direction as the blade turns when cutting grass. There idea was to get ...
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...coming loose that hold the blades on thanks jamie perhaps because you forgot the loc washers when assembling it the blades are held on with a bolt and a nyloc nut and a flat or cupped spring washer ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions