Laser has burning plastic smell I have a dell 1700N that emits a strong burning plastic smell, but i cannot find anything wrong. Have replaced the toner cartridge no change. Any suggestions? Depending
...Laser Printer overheating The printer gets very hot on the outside casing above the roller and smoke even appeared a couple of times. I cleaned it but to no avail. Thank you, MJ change your fuser ...
overheating getting far too hot, not picking up paper properly, part printing of page 1.call service. it's dangerous becouse too hot fuser section can make open fire. teristor in fuser damaged, or ...
printer is very hot on the back even when not used in hours low voltage power sully and fuser need replacing.fuser is overheating. mine is the same way, to solve this I elevated the bottum by 2 inches
...Laser Printer. Printer sitting for 3years and now I want to know what the SC_500 means. I believe it has something to do with the Motor and overheating? Is it worth fixing? Well, I've never worked on ...
...to be a common problem for the 2510 and the 2010. Fan your paper from all four sides before using it. Also, make sure your printer isn't overheating, as overheated paper seems to make it jam as ...
Question about 1110 Laser Printer
...Laser printer will not print. It tells me there is a fuser error. Fuser error usually means that the heater element has blown, or is not functioning properly. The device will usually lock itself out ...
Question about Phaser 3100MFP/S Laser Printer
XEROX PHASER 3100MFP PRINTER AND SCANNER NOT WORK Are you getting any messages? Are you out of ink, need to replace the drum unit? The fuser overheated? Or does it come to ready and just not function?
printer off and then on. 3. Reseat cables to the laser/ scanner and engine controller. 4. Replace the laser/scanner. 5. Replace the DC controller. What works for me was this... 1. removing the board..
Does not go. Does not want to print. Turns on. Makes noise. overheated You may want to open it up and clean it out, (dust etc) it may having a thermo error thus shutting down to prevent any ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions