lanier copier ld145 locked up, code is lanier copier ld145 locked up, code is sc546 Fuser warm up problem. Cause needs to be fixed and then code can be reset in service mode by a tech.
sc 546 lanier ld This is a fuser error code resetable by entering service mode. -Carl
...service mode on a lanier ld225 Press Clear/Modes, then 107, then press AND HOLD Clear/Stop This will get you into the service mode screen. Know what you are doing before going into any modes and ...
lanier sc 542 Problem Machine turns on and then gives this code. This is a hot section problem, can be reset by entering service mode (pushing in sequence clear modes 1-0-7 hold stop button down for 5
lanier model 5627,fault code SC542 upon power up try this: 1. Press the clear mode key (yellow key) 2. Use the keypad to enter "107" 3. Old down clear/stop for at least 3 secunds. (red key) 4. Enter ...
lanier model 5627 with fault code sc542 upon power up. LOL I think I already gave you a solutiontry this: 1. Press the clear mode key (yellow key) 2. Use the keypad to enter "107" 3. Old down ...
What is the service mode for a Lanier 5627? Why you continue to ask the same things? Why do you continue to put new posts? If you answer when I suggested that perhaps you have your problem solved.
Question about Ld345 Ld335 Ld245 Ld235 Ld145 Upper Fuser Roller
how to reset fuser error code on lanier ld235? fuer unit reset. not toner. i told you twice Come into test mode, if it comes back the fuser service needed. -Carl
lanier 5518 with a sc541 code To clear enter service mode and cycle power,(push in sequence clear modes(yellow) 1 0 7 then hold the stop(red) for 5 seconds) -Carl
Question about Ld228c Ld232c Ld238c Copier Fuser Unit
How do I adjust print margin in service mode I need to adjust print margin where is this located in the service mode I figure it can be done on the computer settings for the printer.
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions