...The lamp LED on the front changed to green and the projector started up. So the button sequence they provide in the manual works, you just have to push them in rapid succession. Hope that
Question about Conference Series XG-P25X Multimedia Projector
...LED ON LAMP AND POWER LED either the lamp hours are close to or exceeding 1400 hrs and the lamp needs replacing, or the ballast is starting to fail. with the projector on, check the lamphours in the ...
lamp LED flashes (green). after a few seconds both LEDs are on steady (amber). There are no other lights on the projector reset the lamp timer. unplug it and plug it back in. hold down the enter, down
...light continues to blink and will not go solid. what is the projector issue? is the lamp not lighting? are the fans running? did you just replace the lamp? is the led red or green? need more
...lamp LED will blink green but no light will come out. After about 5 minutes of this then both the Power LED and the Lamp LED will go solid red. I have to unplug the P/S for a little bit and plug it ...
...LED get stable for few seconds , but after few mins both the red and green LEDs blinks one by one for 1 min and after it it shut down with beep. any idea? is it lamp failure while i just used approx ...
...lamp counter on these projectors: Method 1: - Press the decrease volume button on the remote and then the increase volume button within 3 seconds. - The LED light on the projector will turn green. - ...
Question about Projector Lamp For Xv-z90 Xv-z90e Xv-z90u Xvz90e
...led green, lamp led green n flashing,fan on, no lamp light, then both led's solid red, fan off. Bought new lamp and does the same thing?! HELP check the ballast Have a nice day! We supply ...
Question about Projector Lamp For Xv-z90 Xv-z90e Xv-z90u Xvz90e
failed led lamps or boards . how do i repair the led pwb boards in my sharp tv , the front icon is blinking - 1 short 1 long indicating that the led lamps have failed . how do i get to them to fix ...
Question about Projector lamp Projector Lamp
...led turn green and then red then ,check the lamp or lamp ballast (integrated with the powersupply) Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color ...
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
354 Questions