Question about SP-LAMP-LP3F Projector Lamp for LP340, LP340B, LP35
led turns amber. The lamp never lights up. I've pulled the lamp, but don't see any obvious issues. (dark spots, cracks, etc..) According to my research the timer may need to be reset. I've tried this
...led goes into one blinks. The manual says: One (1) blink The lamp won't strike after five (5) attempts. Check the lamp and lamp door installations for loose connections Any ideas on how to check for ...
...LED remain solid green with a non-working ballast? if the lamp is new, it could be the power supply (the ballast is built in to the ps). but make sure you have the right lamp. the X1 and X1a have an ...
Question about X10 DLP Front Projector 1080p DLP Projector Projector
...flashes if it's the lamp led that is orange, turn off the projector for a minute and try it again. if the lamp goes out and the orange led comes on again, replace the lamp and reset the lamp
Question about SP-LAMP-017 Projector Lamp for LP540, LP640, C16
on to get into the menu to reset the timer, so it's not that. if the door hits and activates the switch, it may be the ballast. < LED lamp http://www.frelectronics.com/Lampe-LED_c83
Question about Proxima UltraLight X350 Multimedia Projector
...According to the User's Guide, when the lamp is burned the LED should be blinking red. Any idea what the problem could be? Thanks, Leo the colorwheel. if it does not spin, the lamp will not
Question about SP-LAMP-017 Projector Lamp for LP540, LP640, C16
...led blinks once indicating lamp infocus projector sp5000 red led blinks once indicating lamp not lighting after five strikes. But lamp looks fine and is housed properly. What to do? be sure and reset ...
Lamp strikes 5, Red LED flashes once over and over. All whirs and whines as normal. Removed bulb housing, one side half-caked with dust, vacuumed it. Removed bulb, looks fine (no bulges or black spots
Question about SP-LAMP-017 Projector Lamp for LP540, LP640, C16
...lamp".. and LED is blinking two times as red.. Lamp door is closed properly and the safety swich goes down.. What should be done? To reset the lamp timer , press the increase volume button on the ...
...led- Lamp or fan failure. Usually this is a bulb issue and simply needs the lamp replaced and the lamp life hours reset. Below you will find an image from the owners manual that will allow you to ...
Usually answered in minutes!
400 Questions
218 Questions
72 Questions
80 Questions
76 Questions