Questions & Answers for: Optoma lamp flashing

Question about MovieTime DV10 Multimedia Projector

1 Answer

...Optoma MovieTime works fine for about a year and then suddently die. After initial power-up, the "lamp" and "temp" LED will just flash for a second which is normal and then completely die (not

Ad

...powers down and enters normal flashing green state. I suspect the lamp supply. any comments? The lamp might be burn out or you do ot have the computer in the right plug and the right input

Ad

...flashing again. No other sign of life. Can you help? What is a normal symptom if the main lamp fails to light? Does the main lamp light at all? It sounds light a cooling fan failure. If the fan iis ...

Question about HD70 DLP Projector

1 Answer

lamp flashing, hd72 projector replaced lamp, still flashing, hd72 projector In most projector menus there will be an option to reset the lamp timer, it's usually under the "settings" area of the menu.

Question about MovieTime DV10 Multimedia Projector

2 Answers

...lamp lights flashing, overnight, and in the morning, they were off. The blue power light was flashing, indicating standby mode. It powered on! I had the unit stored in a cold basement so I think this ...

Lamp & temperature L.E.D's at the same time. Power gets to it but after the LEDS flashing for some time, it automatically turns off then on again and repeats the problem. If i remove power cables,

Question about EP771 DLP Projector

1 Answer

...lamp")= flashing 4 times can you verify that the lamp is out with this blinking By what you have told me, the lamp possibly may have blown, so check if the product is still under warranty as you ...

...LAMP WARNING light keeps flashing, still won't turn on? I turn my projector on and the power light goes solid green. Then after a few green light blinks the LAMP WARNING light turns red and the ...

Question about GT750-XL - DLP projector - 3D OPTOMA

1 Answer

lamp fault switch on projector and after a minute it switches off and power light flashes amber and lamp light is on red , do i need a new lamp? Look at the ballast module. It controls the lamp ...

Question about HD80 Projector

1 Answer

...flashing blue lights When switched on it self-tests OK then starts noises of fan, color wheel, lamp lights then after 10-20seconds all stops no fan or color wheel noise and lamp goes off and all ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Optoma Office Equipment and Supply Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

john h

Level 3 Expert

29494 Answers

Are you an Optoma Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...