Questions & Answers for: lamp cover Computers & Internet

...lamp cover Lamp door LampIf all of the above does not solve the problem, you need to replace the lamp. Let the lamp to cool for 30 minutes after unplugging. Use XL-2400 replacement lamp. Remove the ...

lamp/cover light flashes Did you replaced lamp in projector? if yes, please make sure lamp cover is fixed properly on its position. There is safety switch under lamp cover that needs to be pressed to ...

...lamp cover. Pull down the cover toward you. Unscrew the lamp and pull out the lamp horizontally. ✍ The lamp is very hot immediately after use. Never touch the glass portion of the lamp or ...

...lamp cover, changed light and tv wont come on i changed the lamp in the television but, i lost the lamp cover. do i need another lamp cover, or the lamp cover is not the problem the lamp cover has a ...

...lamp door cover at the right side of your TV . After removing the screw and lamp door cover, you will see the lamp cover (it is color black with a handle at the bottom).then turn the knob/handle of ...

Lamp cover error, lamp cover is not attached securely. Please check the lamp cover if deformed. If the lamp cover has been deformed due to excessive heat exposure, replace it with a new one. Sometimes

...lamp,cover` and I cannot do anything with the projector. When you open the lamp cover for replacement of lamp there is a switch in the projector is OFF If lamp cover not fix proper after replacement ...

...lamp cover correctly. I am missing the lamp cover. Is that going to be a problem? U mean the Lamp door cover?Yes?Tv might work,might not.Don't know never tries to turn the tv on before without a ...

...Lamp Cover.Step2 - Remove the Lamp Cover.Step3 - Remove the Lamp Cover Duct holding the tab and pulling it out.Step4 - Reemove the screw securing the Lamp by using a screwdriver.Step5 - Seperate the ...