...lamp cover closed firmly-is power cord good(try with another cable)-is power fuse ok!!!-is power supply ok.and gives normal rating output voltage as a the book say.all previous will check first befor ...
...lamp cover is in place as it has a plunger on it which closes a switch . If the switch is open you will never power on. With the cover remover you can manually activate the switch too and it will ...
Question about TLP 261 Multimedia Projector
...810 says call for service when check the cue references C26 check to see if lamp lights. if not, replace lamp. if lamp lights, pull the platen glass and replace the scanner board under cover by
...lamp cover is open on the TV. Unplug the power cable to the TV. Remove the 2 retaining screws on the lamp cover with a Phillips type screwdriver. Remove the lamp door completely from the TV. Remove ...
...lamp has a cover that you will need to unscrew. Most manufactures use a Philips head screw for holding the cover shut. Unscrew the lamp cover. Unpack the replacement lamp. Be careful not to tough the ...
Question about TLP-WX100U LCD MOBILE PROJ WXGA 600:1 16:10 2200 LUMENS 4LBS Projector
...lamp cover at bottom side of projector, remove lamp cover to take out lamp. Detailed procedure of lamp replacement is written in user manual page-45 Click Toshiba Support link to download user manual ...
...lamp cover correctly. I am missing the lamp cover. Is that going to be a problem? U mean the Lamp door cover?Yes?Tv might work,might not.Don't know never tries to turn the tv on before without a ...
...lamp cover was missing. I tried to tape the switch and bypass it but it wont hold. If I hold the button in the tv will come on and play volume from a station so I just need a lamp and figure out how ...
...lamp not working. I tried 3 different times same problem. I also put the back cover back all times. I was told it may be the ballast The ballast is possible if it does not light the lamp even for a ...
Question about 56MX195 56" SDTV
lamp cover door was given this tv with a new lamp, which I inserted but they lost the plastic door cover so the tv will not show a picture. the front display lights keep blinking alternately blue then
Usually answered in minutes!
401 Questions
267 Questions
218 Questions
181 Questions
164 Questions