Questions & Answers for: kx125 clutch

...KX125 Clutch Problem I have problems with my 2003 KX 125 clutch. When releasing the clutch lever, the bike jumps forward............. in other words, the clutch doens't release slowly and smoothly. I ...

...kx125 04 model will not let me go into 3rd 4th and 5th gear would like to know what the problem is please You probably have a bent shift fork or two > very common and expensive. The only other ...

kx125 clutch wont engage bouthg this bike used eith this problem no matter what you do the clutch wont release. with lever fully pulled its still in gear i have replaced the cluthes and steels. far as

kx125) firstly the clutch wasnt releasing which i found out was due to notches on the castlations of the clutch basket and changed that. the bike worked fine after that for about 100 meters and now it

the torque specs on the clutch springs on a 98 kx 250 Manual for 99-2002 KX125/250 says 8.8N-m 0.9 kgf-m or 78 in-lb Torque in stages in a criss-cross pattern---I hope this helps.

...kx125 2002 has a funny rattle when idleing on the magneto side Take the cover off the magneto side by undoing the 8mm bolt/screw heads around the cover.  Hold the magneto firmly and try and move ...

...clutch on 87 kx125 Instructions Street Motorcycles 1 Mount your Ninja or Eliminator motorcycle and lift it off of the kickstand. Insert the key into the ignition and turn it to the "ON" position. 2 ...

...kx125. I can start it up on the first kick. I can give it gas, rev it up, and everything but when i put it in gear and let off the clutch it cuts off. Can someone tell me what the problem is? Check ...

...Clutch not disengaging. 2. Bent shift shaft. 3. Shift fork bent or seized. 4. Gear seized on the shaft. 5. Gear positioning lever binding. 6. Shift return springs weak or broken. 7. Shift return ...

...KoPFuUXGA04 Service manual https://www.manualslib.com/manual/733912/Kawasaki-Kx125.html?page=2#manual clutch parts ...