Questions & Answers for: konica transfer belt

...KONICA WHERE IS THE TRANSFER UNIT LOCATED ON A KONICA MINOLTA BIZHUB C250 HOW DO YOU REPLACE IT WITH A NEW ONE? Unit is in the right side cover. New one should have instructions with it, but I think ...

konica minolta the printer displaied change image transfer belt There are two ways to solve this issue, First you can replace the whole transfer unit or you can install a new un blown fuse to rest the

...Konica Minolta magicolor 2350 with "paper jam transfer" error even though there is no paper stuck anywhere; the print outs are also faded but the image on the transfer belt looks really good. Help!!! ...

transfer belt located on a Konica Minolta C25 above the 4 drum units have to remove the 4 toners the 4 image units and the transfer belts is removed from the right side after removing a section of the

how do i shut idc sensor shutter on konica minolta c25 transfer belt Sensor is not on the belt it is in the machine

...and Toner Chip Reset - http://www.chipreset.eu Transfer Belt and Fusing Unit Reset Kit - http://www.resetkit.eu Konica Minolta Error Codes & Solutions - ...

...Konica Minolta Biz-hub all the time when i swith on the machine this Error Code appear and the machine is not working any more Code: C2152 Code C2152 Description Transfer belt pressure welding ...

Konica Minolta C-550 I appear P. -21 code After I changed the UNIT appeared to me Code P. -5 What should I do I am going to assume you replaced the Transfer belt and transfer roller. Since you did not

...konica minolita c6500 bizhub Could be one of these: 3. Printer control board (PRCB) 2. 1st transfer pressing/releasing motor (M19) 1. 1st transfer HP sensor (PS15) remove the transfer belt assy check ...

...konica minolta c253 show p21. Why There are a number of things that could cause the error such as the Transfer Belt or an imaging unit going bad. In my experience it is usually the color registration ...