Questions & Answers for: kohler 10430

i have a k-10430 that is leaking up by the handle, and down into the base. when you take the handle off there is an orange "O" ring (hard plastic). could this be my problem? Actually one or more o ...

my kohler k-r10430 drips when water flow has stopped. replace the cartridge, if your not which one, just take the old one with you to the plumbing supply house You will need to replace the valve. The ...

Kohler 10430 single lever kitchen faucet over time limits the amount of hot water coming out of the faucet. There seems to be a shift in the faucet inner body core (part no. 1036775) where the hot and

...10430 single handle model. Under the handle, there is a curved trim ring at the top that needs to be unscrewed from the base.  This can be on tight due to hard water buildup.  I cut two ...

...10430 apart to replace the valve cartridge kit that's leaking The handle has a allen set screw loosen that until the handle comes off then the bonnet nut will unscrew revealing the bonnet cap and ...

...kohler K-10430 come off? After removing the oval button cap on the back of the handle loosen the set screw behind it and pull the handle up. The bonnet is threaded so hold the faucet body with one ...

...kohler forte k-10430 Does the hub come off to expose the o rings? or do i need to remove the clamp under the counter/sink You may have a good idea about the locations of the 3 o-rings when you have a ...

...the diagram on page 15 of the installation guide. The link to the guide is: ...

why does my kohler 78061aa limit the amount of hot water coming out of faucet Blocked inlet. Supply shutoff not open all the way. Debris in shutoff valve. This happens in older valves with washers.

...Kohler 10430 kitchen faucet Parts diagrams. Instruction for changing are normally on the Kohler website. Or Google make model replace (the part). ...