Questions & Answers for: Brother knife blade

knife blade to work the edges of the tape into the slot, covering the little plastic window. insert back into printer. worked for me. it's simpler than it sounds. Thanks so much. After hours of trying

was curved, instead of being straight as it should be. With the assistance of a thin bladed kitchen knife I was able to properly relocate it and the printer works as perfectly as it always has. remove

...blade craft knife to cut the threads. Take the fabric away. Open the needle plate and remove the bobbin and bobbin case. Clean the shuttle and surrounding area from any accumulation of lint or thread ...

...use a small screwdriver or tip of a knife blade to work the edges of the tape into the slot, covering the little plastic window. insert back into printer. worked for me. it's simpler than it

...knife blade to work the edges of the tape into the slot, covering the little plastic window. insert back into printer. worked for me. it's simpler than it sounds. Cutting the 5th wire worked wonders ...

...knife so you don't have to cut through the fabric? I'm trying to serge a waistband in but don't want to cut he fabric. there should be a cutting blade lock switch that you have to turn, it should be ...

Brother Serger 1034D top cutter blade doesn't move Brother Serger 1034D top cutter blade doesn't move maybe knife is too big for the serger.

...not moving to left on Brother 1034D Need help. Cutter knife switch won't slide to left to deactivate knife. Not sure but try pushing the blade down with your finger then moving the switch to the

...knife? Push it down with your finger. Why do you want to lower the lower blade. You can sew without cutting by simple swinging the upper blade out then up. You do not need to lower the lower

Knife Overlock Blade - Upper and Lower Amazon.ca https://www.amazon.ca > ... 2pc Set Serger Knife Overlock Blade - Upper and Lower - Brother 925D 929D ... Return policy: Eligible for Return, Refund or