Questions & Answers for: Ford km 10

Question about 2001 F250 Super Duty Super Cab

1 Answer

...10 minutes and start ok. at an other corner it did the same. I come bawack to home, running ok for30 km and stall again and finally it ttall at home. I don't know the problem. lack of power at that ...

Ad

...10 km. Its a 1990 ford f 150 xlt lariat 4x4. The engine runs yust fine but exhaust is black. The engine is a 302 with efi fuel injektion 4,9 liter. You need to replace the sensors,,Throttle ...

Ad

...10 km.help 1990 ford f150 xlt lariat 4x4 aut. it runs fine but the exhaust is black when you kick the trotle. sounds like you need a ring job on those pistons. you are having a lot of blow by. make ...

km) or six months to another value, proceed to Step 3. 3. Once ?OIL LIFE SET TO XXX%? is displayed, release and press the SELECT/RESET button to change the oil life start value. Each release and press

...10 to 15 km the dash warning lights come on the gauges jump around and there is no throttle response. After a minute or two it clears up and runs fine. Check the alternator out put,if possible,check ...

...will start again after a rest but continues to stall repeatedly usually after about 5 to 10 km. Once the days are coller she runs fine. you have problem with cooling system could be coolant temp ...

...for about 10 km check engine light on? missfire should trigger dtc...recommend tune up read your spark plugs, could be bad fuel or fuel filter-are you using the correct fuel grade for your

Question about 2001 Windstar

1 Answer

...10 km Chances are the ignition coil block is cracked and shorting out. About 80 dollars for part. As the choke opens when engine gets warm, the air/fuel mixture gets leaner and the spark is too

...10, 2012 - The same problem presist on slow speed also. ... Still the problem presist on sudden acceleration and when we strart up in signals. .... Ford ikon 2002 clx 1.6i starting problems start ...

Km/h (45 to 65 MPH) for 10 minutes (avoid sharp turns and hills) Note, to initiate the monitor: TP MODE should =PT, EVAPDC must be >75%, and FLI must be between 15 and 85% Executes the EVAP Monitor

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2004 Ford F150
2004 Ford F150

2,636 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...