kitchenaid mixer it wont start Try replacing the moter brushes,if not its probably ether wiring or in the switch board. I have a Kitchen Aid Mixer K45SS. I do not have a manual. What must I do to turn
Mixer switch is locked While the mixer head is down and locked in place the safety lock, Im assuming wont disengage. I can not turn the mixer on. If this is a 325 watt Artisan, there is no safety ...
Question about KSM150PS Artisan Series Stand Mixer
my kitchenaid stand mixer will not lock and will not turn on my kitchen mix will not lock and will not turn on Have you checked to make sure everything is in place correctly?
Question about KHM5DH Ultra Power® Hand Mixer
...mixer model khm5twh. the second beater will not stay in the socket. i'm wondering if i'm doing something wrong or if the locking mechanism has given up. You're not doing anything wrong, the ...
Question about KSM150PS Artisan Series Stand Mixer
My Kitchenaid Stand Mixer bowl does not stay locked in place. It appears the base where the mixer sits might be stripped from making too man. Is this possible. Where do I find a part to replace it? ...
Question about K45SS Classic Stand Mixer
my kitchen aid mixer bowl falls out when I'm mixing The bowl comes unscrewed when the mixer is on Try giving the bowl an extra twist when mounting it, you may need a new screw cap (the piece the ...
Question about K45SS Classic Stand Mixer
KITCHENAID LOCK IS GETTING STUCK AND MIXER IS CLUNKING I am having the same problem. The head wiggles when beating and the blade is getting worn on the bottom, protective cover is getting worn off by ...
...mixer will not lock If it is new take it back and get a service agent to sort it out for you. The solution can often involve filing out the locking slot. Make sure that the hinge pin is locked tight ...
Question about K45SS Classic Stand Mixer
KitchenAid ACCOLADE 400 Mixer.When mixing dough the bowl jumps out of the the bowl lock. How can this problem be resolved? I know this sounds a bit simple but the bowl cup can sometimes actually wear ...
Question about K45SS Classic Stand Mixer
Mixer arm does not fully lock. Lever does not go all the way across. when running the arm bounces The "beater height" may be set too high causing interference with the lock mechanism. Please see the ...
Usually answered in minutes!
493 Questions
357 Questions
324 Questions
285 Questions
205 Questions