...Kitchen Aid Mixer K45SS. I do not have a manual. What must I do to turn it on? I have moved the lever that said Off to another position and the lock lever is Locked. Please help ! Sincerely, B. ...
...mixer head is down and locked in place the safety lock, Im assuming wont disengage. I can not turn the mixer on. If this is a 325 watt Artisan, there is no safety switch I know of unless its in the ...
Question about KSM150PS Artisan Series Stand Mixer
my kitchenaid stand mixer will not lock and will not turn on my kitchen mix will not lock and will not turn on Have you checked to make sure everything is in place correctly?
Question about KHM5DH Ultra Power® Hand Mixer
...lock the beater in place. I have the same mixer and the same problem.I have searched at least 20 web sites that carry Kitchenaid repair parts and the part is no longer available. My best suggestion ...
Question about KSM150PS Artisan Series Stand Mixer
My Kitchenaid Stand Mixer bowl does not stay locked in place. It appears the base where the mixer sits might be stripped from making too man. Is this possible. Where do I find a part to replace it? ...
Question about K45SS Classic Stand Mixer
...Mixer Bowl Lock Plate 4163032 This part is really easy to replace, it is held into place with three screws, remove those screws (make sure to hang onto those you will need them to re-install the new ...
Question about K45SS Classic Stand Mixer
...LOCK IS GETTING STUCK AND MIXER IS CLUNKING I am having the same problem. The head wiggles when beating and the blade is getting worn on the bottom, protective cover is getting worn off by hitting ...
...mixer will not lock If it is new take it back and get a service agent to sort it out for you. The solution can often involve filing out the locking slot. Make sure that the hinge pin is locked tight ...
Question about K45SS Classic Stand Mixer
...Mixer Bowl Lock Plate 4163032 and the KitchenAid 5 Quart Stainless Steel Bowl work on yours which would require a modification of the bowl lock plate or replace the mixer. - Colleen @ Mending ...
Question about K45SS Classic Stand Mixer
Mixer arm does not fully lock. Lever does not go all the way across. when running the arm bounces The "beater height" may be set too high causing interference with the lock mechanism. Please see the ...
Usually answered in minutes!
493 Questions
357 Questions
324 Questions
285 Questions
205 Questions