Questions & Answers for: kitchenaid classic lock adjustment

...Classic 250, I have had it for 8 years. The mixer head has been wobbily the last few times I used it. Today while mixing up cookies for my son in Iraq, the vinyl on the paddle started coming off ...

Kitchenaid Classic -Mixer Head wobbles or shakes back and forth I was told to tighten the screw that holds the hinge pin in place. What other options do I have ??? This was a friends mixer and she ...

Stand jumps My mixer head is jumping up and down while mixing it has even worn the white off the beater. while off you can actually have the mixer locked and you can move the head up and down in ...

...kitchenaid.com/flash.cmd?/#/page/home). Click on Customer Care>Locate Manuals& Guides> and enter the 6 character model number, in your case K$45SSW and select the file listed for your model ...

lock down & the paddles are rubbing I think what has happened is the head's position has dropped over time. If you left the head up there is an adjustment screw on the hinge visible from the front

...kitchenaid.com/flash.cmd?/#/page/home). Click on Customer Care>Locate Manuals& Guides> and enter the 6 character model number, in your case K$45SSW and select the file listed for your model ...

The mixing head, the part that flips up is loose. when i am mixing and i try to lock the head i have to lip it slightly to be able to lock it. after that it makes a noise as the beater, either the ...

...classic KA mixer will not start on speed position one or two. It will start if I move the the speed knob to 3 or 4. I then can use any speed. This isn't normally a problem unless I forget and ...

K45SSWH bowl clearance issue (different) By adjusting the screw with a flathead screw driver, the mixer head isn't able to lock into place. I am handy with tools and have even completely disassembled ...

...KitchenAid K45SS Classic Stand Mixer? [email protected] It is in the front middle of the hinge area, visible with head raised. Clockwise to lower and anti clockwise to raise. Head height is set ...