Question about KITCHEN AID 5 Quart Artisan Series Stand Mixer
KitchenAid Artisan Stand Mixer - Tilt is Tilting too Much & hits the bowl! I'm not certain, but I think I may have overloaded the mixer when using it recently and now I've screwed up the tilt ...
...place the safety lock, Im assuming wont disengage. I can not turn the mixer on. If this is a 325 watt Artisan, there is no safety switch I know of unless its in the circuit board. Your mixer is
...KitchenAid stand mixer 325 watts Artisan mixer. I can lock and unlock the arm up and down, but I can not get it to turn on. I did confirm the arm was in the lock postition, but when I try to turn it ...
Question about KSM150PS Artisan Series Stand Mixer
The mixer attachment is stuck on my Artisan stand mixer. I try to push up and turn, but it won't move and it is locked in place. Help. Turn it back and forth, may be jamed in locking mechanism/slot.
Question about KSM150PS Artisan Series Stand Mixer
...Artisan mixer's adapter won't come off? How do I get it unstuck? To remove the mixer attachment I belive you must press up on the attachment to lock the inside gear into place. Once it is locked into ...
Question about KSM150PS Artisan Series Stand Mixer
my kitchenaid stand mixer will not lock and will not turn on my kitchen mix will not lock and will not turn on Have you checked to make sure everything is in place correctly?
Question about KSM150PS Artisan Series Stand Mixer
...Kitchenaid Stand Mixer bowl does not stay locked in place. It appears the base where the mixer sits might be stripped from making too man. Is this possible. Where do I find a part to replace it? the ...
Kitchenaid artisan ksm150 - Motor Head Locking Lever stuck in locked position Get a copy of the Repair Part List of your model from Kitchenaid.com Remove the Motor Housing (1). The Latch Lever (3) is ...
Question about Artisan Series Tilt-Head Stand Mixer
...Kitchenaid Artisan stand mixer and the head is loose. When in the down, locked position, I can move it up and down by probably an inch. I've been into shops and tried to do the same with I have a ...
Question about KSM150PS Artisan Series Stand Mixer
...mixer is a artisan mixer, which is also a 5quart mixer, but the head of the mixer tilts back and the bowl twists into the base ring to lock into place. These two mixers will take different bowls and ...
Usually answered in minutes!
493 Questions
357 Questions
324 Questions
285 Questions
205 Questions