kirby sentria, i have it in canister mode with blower attachment on the hose is on with the hand sprayer attachment the problem is the foam is not coming out the sprayer used it just fine all day went
Question about G4 Bagged Upright Vacuum
...Kirby all the way up.Attach the entire assembly to the front of maching,and lock it on.Now turn the belt lifter clockwise until the belt drops onto shaft.Snap the elbow end of hose to tray.Before ...
Kirby Sentria Starting with the shampooer brushroll,slip the belt over the brushroll,and install the brushroll into the bottom of tray.Install the brushroll housing over the brushroll,and looking thru
...wont foam up I cant get my kirby to foam and it runs out of fluid quick Hello, My educated guess ot that the little suds screen is not in the hole on the tank where the hose plugs into it. Check to ...
Kirby foam sprayer attachment wont work everything is hooked up, still won't spray! Hello, The trigger on the suds gun needs to be turned (to the left, I believe) to open up the sprayer. Also, make ...
...wont my kirby carpet cleaner pick the foam and water off the carpet leaving my carpet soaking wet? Is the carpet washer attached to unit is the belt hooked up? don't use the vacum head you well get ...
...Kirby shampooer wont foam checked hose checked tecdrive im told to check sreen is in place don't know were to look Start with the hose OFF the tank (make sure small filter is in place).Fill the tank ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions