Questions & Answers for: Suzuki kick plate

...kick starter shaft in my 2001 Kx 250. everything went smooth, or so we thought. when we finished the installation the clutch would not engage. were thinking that we didn't install the push rod ...

...in top gear 6th, put the front wheel against a wall, hold the clutch in and put some weight on the kick start. or push start it and hold the clutch in and vary the throttle to try and free the ...

...kick start, what you will have to do will be put it in its highest gear ie 5th, then rock the bike back and forth gently till it starts to move, the reason why i say this also could be the clutch ...

...pulled over and it died againtried to start it and all it wants to when i kick it over is backfire. Your black ignition box may have gone bad. Or your stator plate came loose and changed your

clutch Hi everytime i pull the clutch lever in and go to kick the bike into first gear the bike stalls as if i havnt got the clutch pulled in ? please can you tell me what you think the problem is ...

kick plate surrounding the steering column...run your hand down to the bottom of the kick plate. Reach up and under at that point...it's right there. You don't have to remove the kick plate to

...Suzuki shop replace everything. the problem i have now is that the bike is back together and the kickstarter LOCKS up when i try to kick it over. You can turn the engine over fine with a ratchet ...

i cant move the kick starter You need to open the side cover on the kick starter side. Check if the spring that returns the kick starter ha snot came out of his position. There is a hole in the casing

kick in Hi mate I'm pretty sure you can only adjust between 2 settings turn it full clockwise you get more top end power but lose some of your bottom end power or anti clockwise for the opposite . Try

I have a Suzuki lt230 1986 quad sport i can kick start it and it idles but when I go to put it in gear you can here it engage but when you let off of the clutch and give it gas it does not move. ...