Questions & Answers for: KitchenAid kick plate

...easier. It's that easy. Just make sure you check your water lines for leaks BEFORE re-installing the kick plate. And, make sure you reconnect the wires properly. Good luck. I hope this helps

...kick plate inside you will see the pump and the hose to clamp if you didnt vacum remove the filter by turning the round plastic piece on the front of the pump see if a forgien object is interfearing ...

water not drainge in my kitchenaid dishwasher/KUD101FLSS3 there is probably something stuck in the pump. Take the bottom kick plate off, and see if the pump is trying to work.

...maker has stopped working and filter indicator says "change" Could they be related? How do I change the filter? open frig door and look down and to the left on kick plate and you will see the

no longer engaged Could be a couple of things. I have found the end of the spring broken off on mine. Took the kick plate off and retrieved the spring and bent a new hook on the end and reinstalled it

...filter is located on the bottom behind the toe-kick plate. Unscrew it and pull it out. Install the new filter and tighten it. ...

...refrigerator runs more than usual, try cleaning your condinser coils. They are located behind the bottom kick plate on most ...

...Hi, This model number given is incomplete, should be 4 letters then numbers. But check the kick plate area, every model shipped has this information in the kick plate folded up in it. Good ...

can't enter diagnostics check tech sheet located in kick plate remove screws on lower plate there should be a data sheet Cheers

...kick plate on the Kitchen Aid Superba made in 1998? Does the kick plate have to be removed from the bottom of the Kitchen Aid Superba KSR52206WH00 refrigerator? Hi, the filter should be on the bottom ...