Questions & Answers for: Bosch kick panel

Question about Bosch Dishwashers

1 Answer

...as well as underneath the kick panel at the floor. Remove the end screws of the kick panel and near center you will see a model number generally starting with SH... MINE is an SHU4306 / UOC series ...

Ad

Question about Bosch Washing Machines

1 Answer

kick panel at the front bottom of the machine. The 2 screws need just 1 turn to loosen, use a flat head screwdriver. There are a couple of hidden clips on the Kick panel that secure it to the machine.

Ad

Question about SHU9915UC Dishwasher

1 Answer

...You have a bad water valve here is your link http://www.appliancepartspros.com/part_details.aspx?part_id=3783031 You can gain access to it buy removing the kick panel and front door panel. Good ...

Question about SHU9915UC Dishwasher

1 Answer

...don't get a flood. Remove the base kick panel and look with a torch for a float. Disconnect power first. Dry off the float area - remove water and it will work again - but you need to find that

Question about PowerStar AE125 AE125 Whole House Electric Tankless Water Heater...

1 Answer

when i am taking a bath or a shower somtimes it kicks my breaker what would cause this and how do i fix it Does the panel box have the proper size breaker for this unit.Iwould start with checking that

Question about 24 in. SGS43C12 Classixx Free-Standing Dishwasher

1 Answer

bosch classic xx diswasher not emptying Open kick panel under front of dishwasher.  With flashlight, observe drain selenoid during exhaust cycle. If it does not operate, it must be replaced.

Question about 24 in. SGS43C12 Classixx Free-Standing Dishwasher

1 Answer

emptying - what should I do Recirculate/drain selenoid may have failed. Remove bottom kick panel and watch selenoid durind exhaust cycle. If it does not open to all water to empty, it must be replaced

Question about 24 in. SGS43C12 Classixx Free-Standing Dishwasher

1 Answer

either this is blocked or the hose that runs from it to the right and along the back of the kick panel and into the sump. Clear either or both (make sure all hoses are pushed true when repositioning)

Question about Logixx WFT 2806 Front Load Washer/Dryer

1 Answer

...it turns off and beeps and the anti crease/end button flashes Pls help driving me crazy Possibly a blockage pump or drain outlet, check the filter behind the flap (bottom right on the kick

Question about Logixx WFT 2806 Front Load Washer/Dryer

1 Answer

What does code E15 indicate? E 15 means it is wet underneath from a leak or spillage, to fix this, remove the kick panel and look for water, you may need to pull it out from where it is installed

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Bosch Dishwasher Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...