Questions & Answers for: kia sephia belt slipping

noise when heat or air is on, a little smoke on by passenger winshield crackling noise when air or heat is on, maybe something got into the blower. last weekend I had the air on alot while shopping ...

HOW DO I REMOVE SERPENTIENE BELT? I CANT FIGUERE OUT HOW TO REMOVE THE SERPENTIENE BELT TO REPLACE THE ALTERNATOR BELT... On one of the pullys you will see what they call a tensioner pully. Its a ...

...SEPHIA check the fluid. if its fine then you probally need a rack and pinion. also check the belt that runs the pump. Check the fluid level in the power steering reservoir. If it is empty you have a ...

...kia sephia and what had happened is the belt slipped and broke several teeth and im trying to aline the both camshafts. according to the manual their are two notches on the cam but on mine there is ...

...fire plugs. The squealing could have been a locked up alternator (probably caused by a bad bearing) and the drive belt is slipping on the drive pulley, making the squeal. Hope this is of some

Oil leaking from behind the plastic timing belt cover. The oil is getting all over the alternator and power steering belts and making them slip. cover is cracked will need replaced. or seal at ...

...Kia Sephia. I did not have to loosen anything, the belt went right on and is loose. How do I adjust it to make is right? 1-----wrong belt 2-----wrong routing 3-----brocken tensioner 4-----most newer ...

...kia sephia over heated today. could it have been the heat? My air conditioner was. Physically look in the radiator under the cap when cool, for coolant level, and check the valve in the cap for ...

fault code p0340 kia sephia that code means there is a fault with cam sensor, check cam sensorresistance. check timing belt make sure it did not break is slip 

...Kia Sephia. I was driving with the defrost on. I then heard a noise and the battery and brake light. I turned off for a sec, but it was able to start up again. A few miles down i stopped the vehicle ...